Home | About Us |ERP Implementation| ERP Projects | ERP Forums | Links | News | contact Us
About ERP, Enterprise Resource Planning, ERP Software,
::ERP Softwares::

 

Overview ERP
Overview ERP
Overview ERP
Overview ERP
Overview ERP
Overview ERP
Overview ERP
Overview ERP
Overview ERP
Overview ERP
Overview ERP
Overview ERP

 

ERP erpsystemswordsr Home Page


RIMM

Reading: Rim
Full spelling: Rambus Inline Memory Module
Field:
Semiconductor > memory > RAM > RIMM



Standard of the memory module which is used with RDRAM and Direct RDRAM. Basic design has followed DIMM, but there is no compatibility. It is possible in the motherboard of the personal computer, to load the RIMM module up to maximum of 3, when only under 3 you do not install, it is called “Continuity RIMM”, memory chip is not loaded has meant to point to the module “of the sky”.

RIMM1600 <PC800>

Field:
Semiconductor > memory > RAM > RIMM1600

The client P2P (two Pia Pia) does communication directly with system, the groupware of server At one of the standard of Direct RDRAM, the specification which corresponds to the memory clock to 800MHz. As for RIMM1600 standard of memory module, as for PC800 it is standard of the memory chip which corresponds.

As for maximum data rate with 1.6GB/s, equality to the PC1600 standard of DDR SDRAM. As for the chip set which such as i840/i850/i860 corresponds to many RDRAM 2 collecting PC800 corresponding memory, it utilizes (dual channel) for the sake of, maximum data rate in this case becomes 3.2GB/s. There are also times when the value, this 3.2GB/s is made the maximum data rate of PC800, but with memory module 1 as a maximum data rate it is inaccurate.

RIMM2100 <PC1066>

Reading: In rim plug [hi] [ya] [ku]
Field:
Semiconductor > memory > RAM > RIMM2100

At one of the standard of Direct RDRAM, 1066MHz (DDR of 533MHz) to with memory clock maximum data rate those of 2.13GB/s. As for bus width former Direct RDRAM similar 16 bits.

Also “PC1066” is called, but as for PC1066 in specification of Direct RDRAM tip/chip which operates with 1066MHz, this those which are loaded onto the module which is 16 bits in bus width are “RIMM2100” (the highest 2.13GB/s) with, those which are loaded onto the module of 32 bits “RIMM4200” (the highest 4.26GB/s).

RIMM4200 <PC1066>

Reading: The rim it is in the plug the [hi] [ya] [ku]
Field:
Semiconductor > memory > RAM > RIMM4200

At one of the standard of Direct RDRAM, with the memory clock to of 1066MHz (DDR of 533MHz) maximum data rate those of 4.26GB/s. Bus width is expanded by 32 bits of 2 times that former Direct RDRAM, the clock being the same the same “PC1066” tip/chip was loaded in comparison with “PC2100” module, speed has reached 2 times.

Also “PC1066” is called, but as for PC1066 in specification of Direct RDRAM tip/chip which operates with 1066MHz, this those which are loaded onto the module which is 16 bits in bus width are with “RIMM2100” (the highest 2.13GB/s), those which are loaded onto the module of 32 bits “RIMM4200” (the highest 4.26GB/s)

RIP

Reading: Lip
Full spelling: Routing Information Protocol
Field:
Network technology > network control > RIP

Protocol because the control equipment of the rooter and the like exchanges route information reciprocally inside network. For TCP/IP and one for IPX/SPX and the like there is a type in every superior protocol, it is something which is different respectively completely. It judges the control equipment of the rooter and the like, you should have sent the packet somewhere on the basis of the route information which is obtained with RIP.



 
 
ERPwordsd
Technical Dictionary
 
 Page copy protected against web site content infringement by Copyscape
 All Content On This Web Site Are Copyrighted Reserved © 2008 by jason john onwer of abouterp.com