|
| ERP erpsystemswordsu
Home Page |

|
URL
Reading: U earl l
Full spelling: Uniform Resource Locator
Field:
WWW > Access > URL
The information resource which exists on Internet () the recording mode which such as document indicates the place and picture. It hits to of the information in Internet. Type and server name of information, port number, it consists of folder name and file name etc.
|
US-ASCII <ASCII>
Alias:
ASCII
Field:
Expression of information > letter/font > character code > US-ASCII |
The American National Standards Institute (ANSI) decided in 1963, system of the character code for information interchange. In 1967 International Organization for Standardization (ISO) with almost same ones as the International Standard “ISO 646” of the mark for information interchange which is decided. It is expressed at 7 bits, the alphabetical character of 128 types, consists of the number, the sign and the control code. But actually in order 1 letters 8 bits (1 bytes) with to express, to handle the letter of 256 types it is possible the computer, the letter which differs depending upon the computer manufacturer and the country is recorded in the extended territory of 128 letters where ASCII has not decided. In Japan, it is standardized the code which recorded [kana] letter in the extended territory as “JIS X 0201”.
|
USB
Reading: U s B
Full spelling: Universal Serial Bus
Field:
Personal computer > I/O > serial /USB > USB > USB
|
The keyboard and the mouse, one of standard of the channel which ties peripheral device and the personal computer such as modem and joystick. It was thrown with the standard name, USB 1.1 as a standard in order to connect the equipment which excessively does not exchange the data of bulk with the substance. But, the start-up of IEEE 1394 which is planned at the beginning as high-speed serial interface was late, transfigured in the interface where also result, CD-R and HDD etc where at that time the spread of USB 1.1 advances explosively dangle. But, as for USB 1.1 being highest, 12Mbps (=1.5MB/s) with because it is the standard which can do transfer rather at only the low speed which is said, USB 2.0 (HI-SPEED USB) was decided the fact that demand for high-speed transfer is satisfied as a purpose.
|
USB 1.1
Reading: U s B you say to be, the [chi]
Full spelling: Universal Serial Bus 1.1
Field:
Personal computer > I/O > serial /USB > USB > USB 1.1
|
eripheral device and the like. It is the USB standard which presently is used most widely, the most general personal computer - is interface between the peripheral device.
USB 1.0 which is the first version of USB was announced in 1996 January, USB 1.1 which improves this was announced in 1998 September.
As for USB 1.1, such as specification of electric power consumption in the peripheral device mainly stipulates the point which is ambiguous with the specification in USB 1.0 strictly, it is something which.
The transfer standard of USB as for each peripheral device can use properly these two transmission modes. |
USB 2.0 <HI-SPEED USB>
Reading: - The [te] it is in u s B the [ze] [ro]
Full spelling: Universal Serial Bus 2.0
Field:
Personal computer > I/O > serial /USB > USB > USB 2.0
|
| |
The USB standard which specification decided in 2000 April, becomes the version upgrade edition of USB 1.1. As for term of endearment “HI-SPEED USB”. You are proud of the high data rate, highest 480Mbps, connecting the storage equipment such as HDD and CD-R etc, you are designed in such a way that you can show sufficient performance.
As a standard, USB 2.0 has become sufficient ones which add HS mode to former USB 1.1. Therefore, the transfer mode with of USB 2.0 LS (Low Speed) mode (1.5Mbps), FS
As for USB 2.0 the upper compatibility of USB 1.1 can be guaranteed, can use also the peripheral device of present USB 1.1 conformity that way with USB 2.0 environment. But, if with the environment where the equipment of USB 1.1 and the equipment of USB 2.0 exist together, OS and the USB controller (USB interface of personal computer side), the USB hub does not correspond to USB 2.0, data transfer with 480Mbps. When there is USB 2.0 non corresponding equipment between the controller and the peripheral device, in order to operate as USB 1.1, transfer rate 12Mbps is limited highest. By the way, USB because of 1.1 and the full compatible you can use the cable that way.
|
|
|
|
|